Moving a modern trike motorbike is somewhat different from that of a traditional two-wheeled bike. It requires consideration of several factors including the dimensions, wheel arrangement, and loading arrangement prior to placing the vehicle on the trailer.
This is one example where a 2026 Can-Am Spyder ST-S was moved from St. Charles, Missouri to Detroit, Michigan. The distance covered in the move was approximately 546 miles and the entire move cost $750.
The Can-Am Spyder was working fine and it traveled inside an enclosed trailer.
The Route
The route began at St. Charles, MO 63301 and ended at Detroit, MI 48219, spanning around 546 miles.
Although it isn’t considered a very long cross-country transport job, there are still a number of details to be considered when transporting something that will travel 546 miles. The transportation process needs to go without a hitch when dealing with a powersport vehicle with a wider base than that of an ordinary motorcycle.
The weather and road conditions during the trip may vary due to the Midwest region being covered by the transportation route, depending on the season.
For the customer, the aim was clear, to deliver the Spyder from Missouri to Michigan without adding any unnecessary miles to its odometer.
Why Shipping a Can-Am Spyder Is Different
The Can-Am Spyder ST-S 2026 is unlike any other motorcycle because of its three-wheel construction and the fact that its front part is significantly wider.
It goes without saying that operability of the vehicle does simplify the loading process, but it does not eliminate the need for proper planning.
As far as the Spyder under consideration was operable, it could be driven into the right position. Photos can be taken in order to record the condition of the vehicle prior to the loading process.
While inside the trailer, the Spyder has to be positioned and secured properly so that it would not move around during the whole journey. The appropriate wheel chocks and tie-down equipment should be utilized to limit movement.
The width of the trailer as well as its internal capacity has to be enough for the vehicle under discussion. This feature is easy to forget because motorcycles are normally considered to have two wheels.
Enclosed Transport
The Spyder was transported using an enclosed trailer.
In case of a relatively new powersports vehicle, it is a sensible decision. The enclosed trailer would ensure that the vehicle is not subjected to any elements like rain, dust, road trash, etc., that come along with outdoor conditions.
There is also an aspect of peace of mind involved.
One does not need to imagine a new 2026 vehicle being out in highway weather for hundreds of miles on end. In contrast, the Spyder remains enclosed within the trailer while it travels from Missouri to Michigan.
The journey spans 546 miles in total.
Transport Cost
The total cost of transportation was $750.
This would amount to about $1.37 per mile given that there is an approximate distance of 546 miles from St. Charles to Detroit.
It is a useful figure for helping understand the shipping cost, although it is not to be viewed as a general transportation charge for all Can-Am or powersports models.
Transportation charges could vary depending on different factors such as the route, carriers, vehicle specifications, among others.
In this particular instance, the transport charge of $750 is a result of having an operating Can-Am Spyder ST-S and its transportation being done through enclosure.
Occasionally, the equipment and vehicle specs might be more important than the mileage.
Transport Summary
- Vehicle: 2026 Can-Am Spyder ST-S
- Pickup: St. Charles, MO 63301
- Delivery: Detroit, MI 48219
- Distance: Approximately 546 miles
- Condition: Operable
- Transport: Enclosed trailer
- Total cost: $750
- Approximate cost per mile: $1.37
